The very compact ELEQ TQ30 split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ40-B split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ40-B split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ40-C split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ40-C split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ50-E split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ50-E split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ50-L split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ50-L split-core current transformer is especially designed for connection to digital measurement systems.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

The ELEQ EM223 is a current transducer for converting an alternating current of up to 400A to a 0-20mA signal.

The ELEQ EM228 is an active current transducer for converting an alternating current of up to 1250A to an 4-20mA (standard), 0-20mA or 0-10V signal.

The ELEQ EM229 is an active current transducer for converting an alternating current of up to 250A to a 4-20mA, 0-20mA of 0-10V signal.

The ELEQ EM238 is a two-wire transmitter for converting alternating current to a 4-20mA signal. The auxiliary supply of 10-40Vdc is included in the output circuit.

The ELEQ current relay EM303 is suitable for an alternating current of up to 100A and has a fixed switching point of 0.5A. Other switching points are available on customer specification.

The ELEQ current relay EM305 is suitable for an alternating current of up to 100A. The switching point and speed of response are adjustable.

The very compact ELEQ TQ30 split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ40-B split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ40-B split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ40-C split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ40-C split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ50-E split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ50-E split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ50-L split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ50-L split-core current transformer is especially designed for connection to digital measurement systems.

TQ120 is a very compact split-core current transformer suitable for low voltage systems. The unit is easy to install while the top part can be removed entirely.

The IGW is used for measurement and protection in applications. The cast resin insulated indoor supporting-type current transformer can be used up to 36kV.

The IGHSF 12 - head-type current transformer is capable to withstanding the outdoor environmental condition.

The IGHSF 24 - head-type current transformer is capable to withstanding the outdoor environmental condition.

The IGWF D26 is used for outdoor applications. The secondary windings are used for measurement and/or protection purposes or for special use like testing winding.

The IGWF E43 is used for outdoor applications. The secondary windings are used for measurement and/or protection purposes or for special use like testing winding.

The IGWF E44 is used for outdoor applications. The secondary windings are used for measurement and/or protection purposes or for special use like testing winding.

The IGWF E46 is used for outdoor applications. The secondary windings are used for measurement and/or protection purposes or for special use like testing winding.

Auxiliary power supply systems are needed to ensure the energy supply for the operation of primary or secondary devices in a station, switchgear or substation.

The UGE C1 is used for measurement and protection in applications, especially in medium-voltage switchgears. The single pole indoor voltage transformer can be used up to 17,5kV

The UGE D2 is used for measurement and protection in applications, especially in medium-voltage switchgears. The single pole indoor voltage transformer can be used up to 24kV.

Toroidal transformer for measuring, revenue metering (billing) and protection tasks.

A complete product that can be installed in power transformers, distribution transformers and switchgear straight away

The GSR is used for measuring and protection purposes in generator busbar systems with rated primary currents up to 15.000A.

The IGHDF 12 -bushing-type current transformer is capable to withstanding the outdoor environmental condition.

The IGHDF 24 -bushing-type current transformer is capable to withstanding the outdoor environmental condition.

The GSRF380 are cast-resin insulated ring-type current transformers and can be used for measurement and protection in outdoor applications. They are suitable to put on cables or bus-bars. The outdoor ring-type current transformer can be used up to 0,72kV.

The GSRF 450 are cast-resin insulated ring-type current transformers and can be used for measurement and protection in outdoor applications. They are suitable to put on cables or bus-bars. The outdoor ring-type current transformer can be used up to 0,72kV.

The GSRF 540 are cast-resin insulated ring-type current transformers and can be used for measurement and protection in outdoor applications. They are suitable to put on cables or bus-bars. The outdoor ring-type current transformer can be used up to 0,72kV.

The GSRF 570 are cast-resin insulated ring-type current transformers and can be used for measurement and protection in outdoor applications. They are suitable to put on cables or bus-bars. The outdoor ring-type current transformer can be used up to 0,72kV.

The GSRF 630 are cast-resin insulated ring-type current transformers and can be used for measurement and protection in outdoor applications. They are suitable to put on cables or bus-bars. The outdoor ring-type current transformer can be used up to 0,72kV.

The GSQR is used for protection and measurement, e.g. power generators.

The GSAG200 is used for measurement and protection in applications with vibration requirements like power generators. The cast resin insulated indoor bushing-type current transformer can be up to 1,2kV.

The IGSG 178 is used for measurement and protection in applications with vibration requirements like power generators.

The IGWR C1 is used for measurement and protection in application with vibration requirements like power generators.

The IGWR D1 is used for measurement and protection in applications with vibration requirements like power generators. The cast resin insulated indoor supporting-type current transformer can be used up to 17,5kV.

The IGWR D25 is used for measurement and protection in applications with vibration requirements like power generators. The cast resin insulated indoor supporting-type current transformer can be used up to 17,5kV.

The UGER C1 is used for measurement and protection in applications with vibration requirements like power generators. The single pole indoor voltage transformer can be used up to 17,5kV.

The UGER D1 is used for measurement and protection in applications with vibration requirements like power generators. The single pole indoor voltage transformer can be used up to 12kV.

The UGER D2 – optional with fuse – is used for measurement and protection in applications with vibration requirements like power generators. The single pole indoor voltage transformer can be used up to 17,5kV.

The UGER D25 is used for measurement and protection in applications with vibration requirements like power generators. The single pole indoor voltage transformer can be used up to 17,5kV.