Current and voltage measurements

To gain insight into energy currents and energy quality it is important to measure both the current and the voltage.

The current is measured per phase of a field. This can be the supply field or the outgoing fields. Depending on the type of electrical installation and the meter used, the voltage is measured at one point in the installation. After all, the current on the supply field and the outgoing fields is different, but, under normal circumstances, the voltage is the same. However, in case the loss of voltage on an outgoing field has to be detected as well, it is necessary to measure the voltage on all outgoing fields.

Click here to read the whitepaper about current and voltage measurements.